Contact Us
Phone: 0086-13853398571 ( whatsapp or wechat )
TEL/FAX: 0086-533-2293766
E-mail: sales@zbholy.com
Add: Eastern Chemical Zone of Zibo City, Shandong, China
Plastic Transparent Filler Masterbatch for PE Film Dec 24, 2016
Model NO.: Plastic Transparent Filler Masterbatch
Usage: General Plastics
Plastic Forming Method: Film Pressure
Melting Temp: 120
Specific Gravity g/cm3: 2.4
Melt Index (190c, 5kg): 1-5g/10min
Specification: 25kgs/bag
Material: Polyethylene/PE
Plastic Properties After Heated: Thermoplastic Plastics
Color: White
Cotent: 78-83
Moisture: 0.30
Plastic Carrier: HDPE/LDPE
Moisture Content: 0.30%
Transport Package: Woven Bag
Plastic Transparent Filler Masterbatch Performance:
It is a kind of transparent masterbatch which with barium sulfate particle size less than 100nm. It is using plastic as a carrier and it is produced by adding a variety of additives. The characteristics are high transparency, high gloss, good dispersion, non-toxic, corrosion-resistant, stable strong, and especially good in the mechanical properties.
It can be processed on equipment used for polyethylene (LLDPE, LDPE and HDPE), ethylene copolymers and propene polymer (PP). It is not corrosive, however, in order to prevent any accident, it is recommended to purge the equipment before and after using. Suggest to replace (LLDPE, LDPE and HDPE), ethylene copolymers and propene polymer (PP) with masterbatch from 10% to 40%.
It can be processed on equipment used for polyethylene (LLDPE, LDPE and HDPE), ethylene copolymers and propene polymer (PP). It is not corrosive, however, in order to prevent any accident, it is recommended to purge the equipment before and after using. Suggest to replace (LLDPE, LDPE and HDPE), ethylene copolymers and propene polymer (PP) with masterbatch from 10% to 40%.
Plastic Transparent Filler Masterbatch Specification:
| Model No. | Plastic Transparent Filler Masterbatch |
| BaSO4 % | 78-85 |
| Melt Index 190C, 5kg/10min | 1-5 |
| Melting temperature | 120 |
| Moisture % | 0.30 |
| Specific Gravity g/cm3 | 2.4 |
| Color | white |
Related News
- Color Difference
- Black Master Quality Factors
- Master Craft
- Master-advantages
- Master The Basic Ingredients
- Characteristics Of The Filler
- Use Filler And Use
- Filler Uses Segmentation
- Filler Masterbatch Additives For Fu...
- Filler Formulations Introduction
- Plastic Injection Blow Film Color M...
- Plastic Exhibition In Dubai
- Filler Masterbatch for PP Woven Bag
- Calcium Oxide Plastic Moisturer Abs...
- Masterbatch for Mulch Applicator
- Granular CaCO3 Filler Masterbatch f...
- Food Grade Plastic Black Masterbatch
- High Quality General Use HDPE Black...
- White Masterbatch for Plastic Injec...
- PP White Master Batch for Plastic W...
