Contact Us

Phone: 0086-13853398571 ( whatsapp or wechat )

TEL/FAX: 0086-533-2293766

E-mail: sales@zbholy.com

Add: Eastern Chemical Zone of Zibo City, Shandong, China

Home > News > Content
Filler Masterbatch for PP Woven Bag Dec 28, 2016
  • Model NO.: Filler Masterbatch

  • Usage: General Plastics, Engineering Plastics, Specialty Plastics, Blow Film

  • Plastic Forming Method: Extrusion

  • Filler: Talc

  • Carrier Resin: PE

  • Adding Ratio: 5-50%

  • HS Code: 3824909990

  • Transport Package: 25kg/Bags

  • Origin: China

  • Material: Powder and Plastic

  • Plastic Properties After Heated: Thermoplastic Plastics


Filler Masterbatch advantages:
1.The oil absorption of the powder  value is low,  with good fluidity and dispersion, so its the good surface finish of the products.
2. Light Specific grativity, high transparent and brightness, the refractive index close to the PP,PE
3. The high adding ratio is more than 50%.
4. Good dispersion, donnot separate out.
5. Good heat sealing properties, high tensile strength
6. Improve the impact resistance, thermal conductivity and abrasive resistance of the product. Reduce the heat shrinkable property,  improve the strength and toughness of the product.
7. Improve the strength and geometric stability of the product, avoid or reduce the shrinkage of injection molding


Product Data:

NameFiller Masterbatch for PP Woven Bag
FillerTalc
Filler Contentless than 85%
Carrier ResinPE
MFI (g/10min)2-6
Density (g/cm3)1.6-1.7
Melt Temperature160
Mositure<=0.01
Adding ratio5-50%
ApplicationFilm blowing, Injection molding, Blister etc.
StorageKeep the products in a dry, ventilated place, Note to avoid moisture, insolation, rain and breakage in transportation.

Packaging and Delivery:
1. Net weight: 25kg/bags.
2. Compound woven bags.
3. Customerized packaging.
4. Sutible for see transpportation